FAG 713630890 wheel bearings

Outer Ring Shape:Flat; Retainer Type:Punching; Basic Dynamic Load Rating(N):4550; d:10; Days to Ship:6 Days or more; Type:Ball; Size Standards:Metric System; B:8; Number of Raceway Ring Rows:Single Row; Inner/Outer Ring Material:Steel;

Days to Ship:6 Days; Category:Cam Followers; Roller Type:Crowned Type; Roller Lining:None; Application:Low Particle (Dust); Cam Follower Type:Standard; Allowable Rotational Speed(rpm):25900; Roller Type:Crowned Type; D:12; Thread Size on Cam Follower (M)(mm):M4;

Width T(mm):15; Bearing Part Number:6002; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Height H(mm):30 ～ 50; Days to Ship:8 Days; Lateral Width L(mm):68; Shape:T-Shaped; C Chamfered:Not Provided; Type:Bearings with Housin;

Designation of bearing:EX201G2T04; T max.:100 °C; A1:10 mm; A2:45.5 mm; L:60.5 mm; Recommended tightening torque for set screw:5.5 Nm; d:12 mm; S:17 mm; T min.:-40 °C; Weight:0.59 kg;

N:12mm; T max.:200 °C; C0:11.2 kN; Designation of housing:F206-; L:108 mm; e:18 mm; A1:13 mm; A2:40.2 mm; B:38.1 mm; S:15.9 mm;

Internal Symbol:No; Basic Load Rating, Static Rating(N):101000; Days to Ship:Quote; Load Direction:Radial; Outer Ring:With Outer Ring; Inner/Outer Ring Material:[Steel] Steel; Outer Ring Shape:Flat; Types:No; Max. Allowed rpm(rpm):3000; Basic Dynamic Load Rating(N):106000;

Tensioning Unit Type:Tension Type; Dimension P:0.6 in; Dimension H:1.1 in; Bearing - Housing - Seal:LSE104BRHATL; Dimension N:6.8 in; Cr - Dynamic Load Rating:14613 lbf; Cor - Static Load Rating:15287 lbf; Shaft Size:1.25 in; Support Type:Take-Up; Dimension T:8.5 in;

Appropriate Hydraulic Nut:HMV24; Weight:1.93 Kg; L:72.00 mm; C:22 mm; Thread G:M120x2; d1:110.00 mm; Locknut:KML24; D3:145 mm; Lockwasher and Lockplates:MBL24;

D:3.9370 in; r - Cup Frontface To Clear Radius2:0.03 in; Series:385; Y1 - ISO Factor9:1.91; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)4:42200 lbf; Y2 - ISO Factor10:2.84; db - Cone Backface Backing Diameter:2.76 in; T - Bearing Width across Cones:1.9369 in; Bearing Weight:3.1 lb; G1

A:48 mm; T min.:-20 °C; N:17mm; Designation of housing:P207N-; Designation of closed end cover:SCC207; Recommended tightening torque for set screw:8 Nm; B:42.9 mm; A1:31 mm; T max.:100 °C; H2:94 mm;

C:19 mm; Nlim (oil):8,900 rpm; Ca min:5 mm; e:0.34; Weight / Kilogram:0.261; rs min:1 mm; D:58 mm; Max operating temperature, Tmax:120 °C; T:24 mm; Y2:1.77;

Ca90 - Dynamic Thrust Rating (90 million revolutions)7:17900 N; d:40 mm; K - Factor8:1.69; db - Cone Backface Backing Diameter:50 mm; B - Cone Width:23.000 mm; a - Effective Center Location4:-5.8 mm; G2 - Heat Generation Factor (Rib-Roller End):11.6; Cg - Geometry Factor:0.0762; Cage Type:Stamped St

Cg - Geometry Factor:0.103; Db - Cup Backface Backing Diameter:103.89 mm; r - Cup Backface To Clear Radius2:2.54 mm; Y - ISO Factor9:1.31; C - Cup Width:19.000 mm; Aa - Cage-Cone Backface Clearance:1.5 mm; Ab - Cage-Cone Frontface Clearance:2.8 mm; C90 - Dynamic Radial Rating (90 million revolutions

H:117 mm; T max.:100 °C; G:M6x1; T min.:-40 °C; Designation of housing:T209-; H1:102 mm; Recommended tightening torque for set screw:8 Nm; B:41.2 mm; S:10.2 mm; A1:16 mm;

da min:17 mm; F:20 mm; ras max:0.3 mm; B:12 mm; Brand:NTN; Mass:0.01 kg; Precision class:P0; t:1.5 mm; Lubrication hole on inner ring:Non/No; d:15 mm;