INA 4124 thrust ball bearings

Maximum Capacity / Filling Slot:No; Internal Clearance:C3-Loose; B:14 mm; D:47 mm; Weight / Kilogram:0.1; Cage Material:Nylon; Other Features:Deep Groove; Precision Class:ABEC 1 | ISO P0; Harmonized Tariff Code:8482.10.50.68; Inner Race Width:0 Inch | 0 Millimete;

H:30.2 mm; N:13mm; s1:23.05 mm; A:38 mm; J:95 mm; N1:19 mm; B1:28.6 mm; L:127 mm; T max.:100 °C; Weight:0.63 kg;

d:20.0000 in; Seal Type:Triple Lip; Ball Grade:Class 24; Bearing Locking Device:Tapered Adapter Slee; Housing Coating:No Coating; Flinger Material:Stainless Steel; Brand:Baldor-Dodge; Bearing Family:Grip Tight Ball Bear; Anti-Rotation Pin:Yes; Retainer Type:Max Life Cage;

L:140 mm; Z:48 mm; C:14 kN; T min.:-20 °C; S:7.5 mm; Recommended tightening torque for set screw:5.5 Nm; Designation of housing:P205N-; Dz:60 mm; N:13mm; T max.:100 °C;

T max.:100 °C; S:12.7 mm; J:95 mm; C:12.8 kN; Recommended tightening torque for set screw:5.5 Nm; L1:48 mm; Designation of housing:PH204-; s1:15.5 mm; T min.:-40 °C; H2:101 mm;

H:42.9 mm; G:M6x1; E:18 mm; A:48 mm; B:36.4 mm; Recommended tightening torque for set screw:11.5 Nm; d:30 mm; N:M10; B1:48.3 mm; Weight:1.21 kg;

Min operating temperature, Tmin:-20 °C; Characteristic cage frequency, FTF:0.44 Hz; ra max:1 mm; Characteristic rolling element frequency, BSF:7.48 Hz; D:125 mm; d:80 mm; d2:91.7 mm; Axial rigidity:106.3 N/µm; d1:95.2 mm; D2:116.9 mm;

T max.:200 °C; T min.:-20 °C; d1:120 mm; B:55 mm; Recommended tightening torque for set screw:27.1 Nm; S:24.5 mm; d:88.9 mm; C:96 kN; SW:5.56 mm; C0:71.5 kN;

T min.:-20 °C; Weight:1.03 kg; s1:19.05 mm; Designation of bearing:UC206-18G2T20; L:161.5 mm; Designation of closed end cover:SCC206; Z:52.7 mm; C0:11.2 kN; d:28.58 mm; A:41.5 mm;

Manufacturing Plant Location:Rogersville, TN; Bearing Family:Setscrew Ball Bearin; Base to Center Height:Standard; Flinger Type:Standard; Ball Material:Steel; Ball Grade:Class 10; Brand:Baldor-Dodge; Bearing Locking Device:Setscrew; Shaft Attachment (2):Set Screw; Bearing Series:211 Series;

da min:29 mm; B:12 mm; Fatigue limit load, Cu:0.27 kN; Nlim (grease):9,400 rpm; Characteristic rolling element frequency, BSF:5.49 Hz; Characteristic outer ring frequency, BPF0:4.12 Hz; Mass:0.08 kg; Brand:NTN; Da max:43 mm; ra max:0.6 mm;

Designation of bearing:UC212G2T20; d:60 mm; B:65.1 mm; SW:5 mm; T min.:-20 °C; A5:39.7 mm; Recommended tightening torque for set screw:22 Nm; Weight:1.53 kg; C0:32.8 kN; T max.:200 °C;

A1:22 mm; Weight:0.69 kg; C:12.8 kN; C0:6.65 kN; H1:15 mm; Designation of open end cover:SCO204-20; J:95 mm; H2:65 mm; T max.:200 °C; d:20 mm;

A5:21.4 mm; H:117 mm; T min.:-40 °C; N2:49 mm; B1:56.3 mm; Recommended tightening torque for set screw:8 Nm; Designation of housing:T209-; H1:102 mm; A1:16 mm; d1:62 mm;

A2:24 mm; N2:32 mm; Dz:60 mm; T min.:-20 °C; H2:51 mm; Recommended tightening torque for set screw:3.7 Nm; A:32 mm; N1:16 mm; S:14.3 mm; L2:10 mm;